THL 30-4813WI

DC/DC Converter THL 30WI Series, 30 Watt • 30 Watt converter in a 1” x 1” metal package • • Cost efficient design • Operating temperature range -40 to +60 °C without derating • • • • • Wide 4:1 input voltage range: 9-36 and 18-75 VDC UL 62368-1 IEC 62368-1 1500 VDC I/O-isolation The THL 30WI series extends Traco Power’s existing 30 Watt DC/DC converter portfolio with a new generation of 1” x 1” package converters. With the focus Protection against overload, overvoltage on combining cost efficiency and quality this isolated high performance 30 and short circuit Watt DC/DC converter series is suitable for many different applications. The series comes in an encapsulated, shielded 1” x 1” x 0.4” metal package and ofRemote On/Off and Trim function fers integrated remote on/off and trim functions. High efficiency up to 88% enOptional heatsink for increased ables the converter to operate from –40°C to +60°C without derating. All modtemperature capabilities els have a wide 4:1 input voltage range and precisely regulated, isolated outputs. The series meets the latest IT safety certifications (UL 62368-1) and is 3-year product warranty suitable for uses in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where cost efficiency and quality are critical factors. Models Order Code Input Voltage Range THL 30-2410WI THL 30-2411WI THL 30-2412WI THL 30-2413WI THL 30-2415WI THL 30-2422WI THL 30-2423WI THL 30-4810WI THL 30-4811WI THL 30-4812WI THL 30-4813WI THL 30-4815WI THL 30-4822WI THL 30-4823WI 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 7'000 mA 6'000 mA 2'500 mA 2'000 mA 1'250 mA 1'250 mA 1'000 mA 7'000 mA 6'000 mA 2'500 mA 2'000 mA 1'250 mA 1'250 mA 1'000 mA Vnom Efficiency Imax –12 VDC –15 VDC 1'250 mA 1'000 mA –12 VDC –15 VDC 1'250 mA 1'000 mA typ. 87 % 88 % 88 % 88 % 88 % 88 % 88 % 87 % 88 % 88 % 88 % 88 % 88 % 88 % Options THL-HS1 - Optional Heat Sink: www.tracopower.com/products/thl-hs1.pdf www.tracopower.com September 20, 2023 Page 1 / 5 THL 30WI Series, 30 Watt Input Specifications Input Current 24 Vin models: 10 mA typ. 48 Vin models: 8 mA typ. 24 Vin models: 1'106 mA typ. (3.3 Vout model) 1'420 mA typ. (5 Vout model) 1'420 mA typ. (12 Vout model) 1'420 mA typ. (15 Vout model) 1'420 mA typ. (24 Vout model) 1'420 mA typ. (12 / -12 Vout model) 1'404 mA typ. (15 / -15 Vout model) 48 Vin models: 553 mA typ. (3.3 Vout model) 702 mA typ. (5 Vout model) 702 mA typ. (12 Vout model) 702 mA typ. (15 Vout model) 694 mA typ. (24 Vout model) 694 mA typ. (12 / -12 Vout model) 694 mA typ. (15 / -15 Vout model) 24 Vin models: 50 VDC max. (100 ms max.) 48 Vin models: 100 VDC max. (100 ms max.) 24 Vin models: 8.4 VDC min. / 8.7 VDC typ. / 9 VDC max. 48 Vin models: 16.4 VDC min. / 17.2 VDC typ. / 18 VDC max. 24 Vin models: 7.8 VDC min. / 8.1 VDC typ. / 8.4 VDC max. 48 Vin models: 15.5 VDC min. / 16 VDC typ. / 16.4 VDC max. 30 mAp-p typ. - At no load - At full load Surge Voltage Start-up Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse - 24 Vin input 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: +12 / -12 Vout models: +15 / -15 Vout models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: +12 / -12 Vout models: +15 / -15 Vout models: - 48 Vin input Input Filter 4'500 mA (slow blow) 6'500 mA (slow blow) 6'500 mA (slow blow) 6'500 mA (slow blow) 6'500 mA (slow blow) 6'500 mA (slow blow) 6'500 mA (slow blow) 2'500 mA (slow blow) 3'000 mA (slow blow) 3'000 mA (slow blow) 3'000 mA (slow blow) 3'000 mA (slow blow) 3'000 mA (slow blow) 3'000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Output Voltage Adjustment See application note: Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) - Voltage Balance (symmetrical load) - Cross Regulation (25% / 100% asym. load) single output models: dual output models: single output models: dual output models: dual output models: ±10% (single output models only) (By external trim resistor) www.tracopower.com/overview/thl30wi Output power must not exceed rated power! ±1% max. 0.2% max. 0.5% max. 0.2% max. 1% max. (Output 1) 1% max. (Output 2) 2% max. dual output models: 5% max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 THL 30WI Series, 30 Watt Ripple and Noise Capacitive Load - 20 MHz Bandwidth - single output 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Start-up Time Start-up Overshoot Voltage Short Circuit Protection Output Current Limitation Overvoltage Protection Transient Response - Response Deviation - Response Time 75 mVp-p max. (w/ 0.1 µF || 47 µF) 10'000 µF max. 7'200 µF max. 1'250 µF max. 800 µF max. 330 µF max. 680 / 680 µF max. 470 / 470 µF max. Not required ±0.02 %/K max. 30 ms max. 5% max. Continuous, Automatic recovery 120 - 170% of Iout max. 150% typ. of Iout max. 125% typ. of Vout nom. (By Zener diode) 3% typ. / 5% max. (25% Load Step) 250 µs typ. (25% Load Step) Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/thl30wi PD 3 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/thl30wi EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A www.tracopower.com/overview/thl30wi EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges - Operating Temperature Power Derating - Case Temperature - Storage Temperature - High Temperature Cooling System 95% max. (non condensing) –40°C to +80°C –40°C to +85°C (with Heat Sink) +105°C max. –55°C to +125°C 2.6 %/K above 65°C (average) 3 %/K above 70°C (average) (with Heat Sink) See application note: www.tracopower.com/overview/thl30wi Natural convection (20 LFM) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 THL 30WI Series, 30 Watt Remote Control - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Environment - Input to Output, 60 s - Input to Output, 1 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF - Vibration - Mechanical Shock - Thermal Shock Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance On: 3.5 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 2 mA typ. -0.5 to 0.5 mA 6'000 m max. 158 - 193 kHz (PWM) (3.3 Vout models) 223 - 273 kHz (PWM) (5 Vout models) 257 - 314 kHz (PWM) (other output models) Functional Insulation 1'500 VDC 1'800 VDC 1'000 VDC 1'000 VDC 1'000 MΩ min. 1'500 pF max. 1'310'710 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf IEC 60068-2-64 2.4 g, 3 axis, random waveform, 30 min IEC 60068-2-27 30 g, 3 axis, half sine, 11 ms IPC-9592B -40 to +125°C, 100 cycles, 30 min each Plastic base-plate w. metal case Non-conductive FR4 (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) 1" x 1" Lead-Free Wave Soldering 260°C / 10 s max. 25 g 11 K/W typ. 10 K/W typ. (with Heat Sink) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 4857a92c-ac23-447a-b527-3f0812941172 - Case to Ambient Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/thl30wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 THL 30WI Series, 30 Watt (0.400) 2.5 25.4 (1.00) 10.16 10.16 (0.400) 10.2 (0.40) Ø1.0 (0.04) BOTTOM VIEW 1 6.0 (0.24) Pinout Pin Single Dual 1 +Vin +Vin 5 4 20.32 (0.800) 25.4 (1.00) 3 (0.10) Outline Dimensions 2 –Vin –Vin 3 +Vout +Vout 4 Trim Common 5 –Vout –Vout 6 Remote On/Off Remot On/Off 6 2 5.08 7.62 2.5 (0.200) (0.300) (0.10) Dimensions in mm (inch) Tolerance: X.X ±0.5 (X.XX ±0.02) X.XX ±0.25 (X.XXX ±0.01) Pin Diameter: ±0.05 (±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5